AT&T 75 - Page 401

110-TYPE HARDWARE
Figure 3-134. Connections for PDMs in Data Mounting
Connection to Individual PDMs (Figure 3-135)
1.
Determine port assignment of PDM from Data Module Form:
EXAMPLE: Port Number B
02
01
Carrier
Slot Circuit
2.
3.
4.
Install PDM per instructions in PDM User's Guide (999-700-028IS).
Install patch cord or jumper wires at cross-connect field.
Administer per AT&T System 75 and System 75 XE Implementation and AT&T
System 75 and System 75 XE Administration.
3-185