AT&T 75 - Page 562

66-TYPE HARDWARE
Installation—FCC Registered Recorded Announcement Equipment
1.
2.
3.
4.
5.
Determine port assignment of feature from Announcement Form:
EXAMPLE: Port Number B 02
01
Carrier Slot
Circuit
Install jumper wires at cross-connect field.
Install recorded announcement equipment per manufacturer’s instructions.
Connect 2-pair line cord (modular plug at one end) from information outlet to
recorded announcement equipment (see Figure 4-88).
Administer per AT&T System 75 and System 75 XE Implementation and AT&T
System 75 and System 75 XE Administration.
Figure 4-88. Connections for FCC Registered Equipment Provided for Recorded
Announcement/Dial Dictation Equipment (Analog Access)
4-136