Z100-TYPE HARDWARE
Label Code 115A—4-Pair Station Labels
This label code provides only the 4-pair station labels (blue) numbered 1-480. These labels
are the same as the 4-pair station labels in label codes 101A through 105A. Consists of 100
labels (see Figure 2-30).
Label Code 116A—3-Pair Station Labels
This label code provides only the 3-pair station labels (blue) numbered 1-560. These labels
are the same as the 3-pair station labels in label codes 110A through 114A except some extra
labels are provided. Consists of 100 labels (see Figure 2-31).
Label Code 117A—Port Labels
This label code provides only the port labels (purple) for carriers A-E and are numbered 1-20
for each carrier. These labels are the same as the port labels in label codes 101A through
114A. Consists of 100 labels (see Figure 29).
Label Code 118A—MET Circuit Labels
Consists of ten purple labels (see Figure 2-29) to identify port jacks on two MET line boards.
Label Code 119A—16-Port Analog Line Labels
Consists of ten purple labels (see Figure 2-29) to identify port jacks 9 through 16 on a 16-
port analog line board.
Label Code 120A—4-Pair Section TIE Labels
Consists of ten grey labels (see Figure 2-33). The labels are sectioned to identify six 4-pair
station appearances.
Label Code 121A—3-Pair Section TIE Labels
Consists of ten grey labels (see Figure 2-33). The labels are sectioned to identify eight 3-pair
station appearances.
Label Code 122A—Satellite Closet Labels
Consists of 40 white labels (see Figure 2-31). The labels are sectioned to identify eight 3-pair
station appearances and are numbered from 1-160.
Label Code 123A—Satellite Closet Labels
Consists of ten unnumbered white labels. The labels are sectioned to identify eight 3-pair
station appearances.
2-49
To Next Page
Loading...