102
SmartLane
10. CUSTOMISATION
To customise your equipment, we advise you to contact the sales manager of your region who will be able to
guide you in this step.
10.1. REGULATED HEATING (OPTIONAL)
For use at low temperatures, from 0 to -20°C, the SmartLane should be equipped with an optional regulated heating.
As shown in the illustration below, this consists of two components:
• The heater (1) will be placed on a DIN rail fixed to the main frame;
• The thermostat (2) will also be placed on a DIN rail on the power board.
1
2
Fig. 113 - Optional regulated heating
For the wiring of the various elements, refer to the Electrical Technical File (DTE) supplied with the device.
To Next Page
Loading...
