8.33. STORAGE
If the equipment is not going to be used for a long period of time, it is recommended to:
• Store it in the same conditions as before the installation ( Chap. 5.4, page 29).
• Leave it powered on, to maintain the charge of the battery of the CPU board (AS1190).
If the equipment was stored with power off and ambient temperature below 15 °C (5 °F), it is important to allow it
to warm up for 30 minutes to one (1) hour before powering up.
• Ensure that the equipment is protected from bumps and knocks.
• Perform several passages before putting into service to check proper operation.
When the equipment is taken out of service, dispose of the various components of the machine in the appropriate
manner (metal parts, electronic components, etc.) according to the regulations in effect.
8.34. DISPOSAL / DESTRUCTION
When the equipment is taken out of service, dispose of the various components of the machine in the appropriate manner
(metal parts, electronic components, etc.) according to the regulations in effect.
93
SmartLane
To Next Page
Loading...
