Automatic Systems SmartLane - When Idle Breach; Wrong Way Breach; Tailgating after Authorized Passage Breach; Fig. 50 - When Idle Breach

7.12.1. “WHEN IDLE” BREACH
When the gate is at rest, a breach is detected as soon as the cells configured for this purpose are obstructed and no permission
to pass has been granted.
Fig. 50 - “When idle” Breach
The Pre-alarm interval is activated to allow time for the user to request permission to pass.
At the end of this time, the buzzer sounds.
In this mode, no fraud is possible, as the movable glass obstacles remain closed until the protection zone is released and a
passage authorization is granted.
7.12.2. “WRONG WAY” BREACH
The intrusion is declared when a person is detected in a direction while a passage in the other direction is in progress, except
in the particular case of an operation in control mode in one direction and free in the other, where by default, a passage in the
free direction does not generate an intrusion when a passage in the control direction is in progress.
Fig. 51 - “Wrong way” breach
7.12.3. “TAILGATING AFTER AUTHORIZED PASSAGE” BREACH
After the obstacles have been passed by an authorized person, detection by the cells configured for this purpose of another
person following in the same direction and without authorization triggers a breach.
Fig. 52 - “Tailgating after authorized passage” breach
50
SmartLane