EasyManua.ls Logo

Automatic Systems SmartLane - Maintenance; Maintenance of Surfaces; Preventive Maintenance

Automatic Systems SmartLane
110 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
8.28. MAINTENANCE
8.28.1. MAINTENANCE OF SURFACES
To retain the surface appearance and avoid any oxidation deposits or marks, it is strongly recommended to regularly treat the
sheets with a product specially designed for this purpose.
Automatic Systems can provide an approved product under reference 0/6031/00.
THE USE OF UNSUITABLE PRODUCTS CAN CAUSE EVEN GREATER DAMAGE:
THE USE OF HYDROCHLORIC ACID IS STRICTLY FORBIDDEN!
HOT HOUSEHOLD BLEACH, EVEN DILUTED, IS STRICTLY FORBIDDEN!
IT IS ALSO STRICTLY FORBIDDEN TO CLEAN THE EQUIPMENT USING A PRESSURISED WATER SPRAY DEVICE!
Dos: Don'ts:
Use a sponge or a soft nylon brush (except for gloss or
mirror polish finishes);
Brush in the direction of the polish lines;
Clean using a soft, non-fluffy cloth.
Use:
Metallic brushes or sponges;
Hard brushes;
Brushes on ‘gloss’ or ‘mirror polish’ finishes;
Abrasive scouring pads or powders;
Chlorinated or other unsuitable products.
Automatic Systems reserves the right to deny warranty coverage in the case of an apparent lack of maintenance.
8.28.2. PREVENTIVE MAINTENANCE
THE MCBF, THE MEAN NUMBER OF CYCLES BETWEEN FAILURES, IS SUBJECT TO SCRUPULOUS OBSERVANCE OF
MAINTENANCE. IT IS THEREFORE IMPERATIVE THAT MAINTENANCE BE CARRIED OUT IN ACCORDANCE WITH THE
FOLLOWING!
THE MAINTENANCE OPERATIONS MUST BE PERFORMED IN ACCORDANCE WITH THE SAFETY WARNINGS! ( CHAP. 2,
PAGE 8)
Regularly:
1. Clean the bodywork using a product intended for stainless steel. Automatic Systems can supply an approved product
under reference 0/6031/000.
THE FREQUENCY OF MAINTENANCE MUST BE ADAPTED TO THE CONDITIONS OF USE OF THE GATE, ESPECIALLY
WHEN PLACED IN AN OXIDIZING ATMOSPHERE: AT THE ENTRANCE TO A SWIMMING POOL (HEATED AND CHLORINATED
ATMOSPHERE), BY THE SEA, IN AN INDUSTRIAL ENVIRONMENT, ETC.
2. Clean the obstacles using a window-cleaning product.
3. Vacuum and clean the masking strip of the cells and the lenses of their optional classic cells using a soft rag soaked in an
anti-static and non-aggressive cleaning agent.
NEVER USE PAINT THINNERS OR ANY OTHER ORGANIC SOLVENT.
87
SmartLane

Table of Contents

Related product manuals