2. SAFETY WARNINGS
• This manual must be available to all persons working on the equipment: installer, maintenance operator, end user, etc.
• The SmartLane range of gates is intended to control the access of people and cannot be used for any other purpose
without risk to the user or the integrity of the equipment. In particular, it is NOT intended to facilitate pedestrian traffic and
should NOT be used as a regular entry/exit gate. Automatic Systems cannot be held responsible for damage resulting from
inappropriate use of the equipment.
• Employees working on the premises must be trained in the use of automatic gates beforehand. Failure to provide such
training to users may result in serious accidents or injuries.
• For safety reasons, children (users less than one (1) meter in height) must be supervised by an adult at all times when in the
vicinity of the unit and when passing through the gate. When the gate is used by a child accompanied by an adult, the child
must precede the accompanying adult.
If regular use by children is anticipated, Automatic Systems recommends installing all the specific options provided to
optimise the level of protection.
• Extreme care must also be taken with animals, which must be leashed and kept under the control of their master at all times.
• Do not install this equipment in an explosive area.
• Do not add non-approved accessories (contact between different metals causes galvanic torque that is detrimental to the
corrosion resistance of the equipment)
• The contractor shall ensure that local standards are observed when installing the equipment.
• All work on the equipment must be carried out by qualified personnel. Any work on this product that is unauthorized or
carried out by an unqualified technician will automatically void the manufacturer’s warranty.
• Personal protective equipment (PPE) must be worn when working:
• Mechanical actions and/or actions involving intentional or inadvertent touching of sheet metal parts or the frame must be
carried out with cut-resistant gloves.
• Access to the mechanism should be limited to personnel who are aware of the electrical and mechanical risks involved in
careless handling.
• For any operation that does not require the equipment to be powered up, turn off the power at the distribution panel or at
the circuit breaker ( Ref. 0, Chap. 4.8, page 20).
WHEN WORKING ON AN INTERMEDIATE CABINET, SWITCH OFF THE CIRCUIT BREAKERS OF BOTH LANES TO PREVENT
THE OBSTACLES FROM MOVING!
B
A
B
A
8
SmartLane
To Next Page
Loading...
