Fig. 45 - AS1653 receiver .....................................................................................44
Fig. 46 - Detection photocell (T/R) .............................................................................44
Fig. 47 - Transmission of motion ...............................................................................45
Fig. 48- Location of fixed obstacle(s) ...........................................................................46
Fig. 49 - Proper use ..........................................................................................49
Fig. 50 - “When idle” Breach. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .50
Fig. 51 - “Wrong way” breach ..................................................................................50
Fig. 52 - “Tailgating after authorized passage” breach ............................................................50
Fig. 53 - “Tailgating before authorized passage” breach ...........................................................51
Fig. 54 - “Grouping before authorized passage” breach ............................................................51
Fig. 55 - “Security zone” breach ...............................................................................51
Fig. 56 - “Stolen ticket” breach ................................................................................52
Fig. 57 - Tightening torque ....................................................................................53
Fig. 58 - Right side panel removal - side A .......................................................................54
Fig. 59 - Power off ...........................................................................................54
Fig. 60 - Power on ...........................................................................................55
Fig. 61 - Locking/unlocking of the mobile obstacle ...............................................................56
Fig. 62 - Installing a panel ....................................................................................57
Fig. 63 - Removing the fixed obstacle ...........................................................................58
Fig. 64 - Adjusting the fixed obstacle ...........................................................................60
Fig. 65 - Straightening the mobile obstacle (To side A) ............................................................61
Fig. 66 - Straightening the mobile obstacle (To side A) ............................................................61
Fig. 67 - Replacing the mobile obstacle .........................................................................62
Fig. 68 - Fixing elements for mobile obstacle ....................................................................63
Fig. 69 - Self-adhesive checkerboard (AUT-E-0007169) ............................................................64
Fig. 70 - Positioning of the checkerboard sticker .................................................................64
Fig. 71 - Replacing the protective profile ........................................................................65
Fig. 72 - Removal / replacement of the closing flap ...............................................................66
Fig. 73 - Removing / replacing the closing flap guides ............................................................67
Fig. 74 - Flap guide adjustment (Fixing) .........................................................................68
Fig. 75 - Flap guide adjustment (Clearance) .....................................................................68
Fig. 76 - Removing a short plate ...............................................................................69
Fig. 77 - Removing a long plate ................................................................................70
Fig. 78 - Installing the cover plate ..............................................................................71
Fig. 79 - Installing the cover plate - Frame fixing points ...........................................................71
Fig. 80 - Removing the extension cover .........................................................................72
Fig. 81 - Removing the extension front panel ....................................................................72
Fig. 82 - Housing extension fixing points ........................................................................72
Fig. 83 - Housing extension with filler stainless steel panels fixing points ............................................73
Fig. 84 - Adjusting the passage of the high mobile obstacle in the flap guide .........................................74
Fig. 85 - Adjusting the flap guides .............................................................................74
Fig. 86 - Adjusting the kinematics (Alignment) ...................................................................75
Fig. 87 - Adjusting the motor crank (Alignment) ..................................................................76
Fig. 88 - Removing the plug(s) and screen(s) of the fixed obstacle ..................................................77
Fig. 89 - DIRAS cell removal ...................................................................................77
Fig. 90 - Removing the REFLEX cell .............................................................................78
Fig. 91 - Adjusting the photocells ..............................................................................79
5
SmartLane