Installation and Upgrades for DEFINITY ONE and
IP600 Internet Protocol Release 10
555-233-109
Issue 6
December 2001
Install and Cable the Cabinet
1-63Install the DEFINITY ONE system cabinet
1
Install left and right panels — wall-mount
Figure 1-30. Left and right panel installation
1. Align the cutouts in the panels with the cabinet hinges.
2. Drill a 1/8-inch (0.3 cm) pilot hole into the wall and secure the panels with
the #12 x 1-inch shoulder screws.
3. Proceed to ‘‘Check AC power and ground for DEFINITY ONE’’ on page
1-64.
Figure Notes
1. Left panel 2. Right panel
indmins3 KLC 091197
To Next Page
Loading...
