Avaya DEFINITY ONE - Set up Your System; Add Translations; Administer Telephone Features

Installation and Upgrades for DEFINITY ONE and
IP600 Internet Protocol Release 10
555-233-109
Issue 6
December 2001
System Initialization
3-30Administer DEFINITY ONE or IP600
3
Set up your system
You are now ready to follow procedures to start your system, including:
■ Setting up dial plans, feature access codes (FACs), and extension ranges
■ Adding extensions for users
■ Setting up special features
■ Setting up routing
■ Assigning and changing users
See Configure Avaya Site Administration on page 7-13 to set up Avaya Site
Administration.
For more information, see:
■ DEFINITY System’s Little Instruction Book for Basic Administration
(555-233-756)
■ DEFINITY System’s Little Instruction Book for Advanced Administration
(555-233-757)
■ DEFINITY System’s Little Instruction Book for Basic Diagnostics
(555-233-758)
■ DEFINITY Enterprise Communications Server Release 10 Administrator’s
Guide
(555-233-506)
Add translations
Refer to DEFINITY Enterprise Communications Server Release 10
Administrator’s Guide
(555-233-506) to add new terminals.
Administer telephone features
1.Administer these features (DEFINITY Translations, Intuity AUDIX
Mailboxes, etc.) per customer order via one of two ways:
a.Avaya Site Administration (web)
Avaya Site Administration must be installed on the laptop or remote
PC that is connected to DEFINITY ONE or IP600.
Connect the PCMCIA card with the laptop or through Remote PC
using the web browser (Internet Explorer or Netscape).
b.Avaya (Lucent) Access Control (LAC) [telnet]
(For direct SAT access without going through Avaya Site
Administration)
Telnet to DEFINITY ONE or IP600 through the LAC to receive the
SAT screen. See ‘‘Start a Telnet session’’ on page 3-4.