Avaya DEFINITY ONE - Add DID Trunks; Requirements; Installation; Add Tie Trunks

Installation and Upgrades for DEFINITY ONE and
IP600 Internet Protocol Release 10
555-233-109
Issue 6
December 2001
Hardware Additions
6-19Add DID trunks
6
Add DID trunks
Requirements
Each Direct Inward Dial (DID) trunk connects to 1 port DID Trunk circuit pack or to
1 port of an assortment of DID trunk circuit packs.
Installation
1. Determine the port assignment of the trunk from Trunk Group form.
2. Install a DID Trunk circuit pack in assigned carrier slot (if an additional
circuit pack is required).
3. Administer forms listed under “DID Trunk Group” in
DEFINITY Enterprise
Communications Server Release 10 Administrator’s Guide
(555-233-506).
Add tie trunks
Requirements
Each tie trunk connects to 1 port of a 4-port tie trunk circuit pack or to an
assortment of international tie trunk circuit packs.
Installation
1. Determine the port assignment of the trunk from Trunk Group form.
EXAMPLE: Port Number 1 A 07 01
Cabinet Carrier Slo
t
Circuit
(Port
Network)
(or Compact
Modular
Cabinet)
EXAMPLE: Port Number 3 A 02 01
Cabinet Carrier Slo
t
Circuit
(Port
Network)
(or Compact
Modular
Cabinet)