Installation and Upgrades for DEFINITY ONE and
IP600 Internet Protocol Release 10
555-233-109
Issue 6
December 2001
Connectivity and Access to DEFINITY ONE or IP600
2-38System administration/Avaya Site Administration
2
Starting an Avaya Site Administration session
The customer must dial into the system to establish a PPP connection, and then
start their Avaya Site Administration session. To set up a computer to dial into the
system, perform these steps:
1. Go to My Computer.
2. Double-click on Dial-Up Networking.
3. Double-click on Make New Connection.
4. Fill in the
name
field; the system should fill in the correct
modem
attached
to the PC; if not, choose the modem that is attached to the system.
5. Click Next.
6. Fill in the
Area code
and
Telephone number
for the system.
7. Click Next.
8. Click Finish in the window saying that the connection was created.
9. In the
Dial-Up Networking
window, right-click on your connection icon.
10. Left-click on Properties.
11. Click on the
Server Types
tab.
12. In the
Type of Dial-Up Server
drop-down menu, select
PPP: Windows
2000, 95, NT 3.5, Internet
.
13. Under
Allowed network protocols
, only
TCP/IP
should be checked.
14. Click OK, when finished.
15. Access the system by double left-clicking the connection icon.
16. On the
Connect
screen, enter the correct
User name
and
Password
.
17. Click Connect.
18. When the connection is established, a screen appears. Click on the
Continue box.
NOTE:
A login window bay appear saying that the connection was
successful.
System administration/Avaya Site
Administration
Avaya Site Administration provides the standard Windows look and feel for
performing basic switch administration. This includes wizards, tabbed windows,
menus, and dockable windows. Customers who use Avaya Site Administration
may administer telecommunications equipment as only a portion of their job
responsibilities, and few will be expert users.
To Next Page
Loading...
