Avaya DEFINITY ONE - Install the DEFINITY ONE System Cabinet; Verify the Carrier Address ID on CMC Cabinets

Installation and Upgrades for DEFINITY ONE and
IP600 Internet Protocol Release 10
555-233-109
Issue 6
December 2001
Install and Cable the Cabinet
1-56Install the DEFINITY ONE system cabinet
1
Install the DEFINITY ONE system
cabinet
DEFINITY ONE cabinets can be floor-mounted or wall-mounted. Set the Carrier
Address ID installing each CMC cabinet.
Verify the carrier address ID on CMC cabinets
1. Verify and, if necessary, set the carrier address ID for each cabinet as
shown in Figure 1-24. Cabinet 1 settings are for the processor cabinet.
Cabinet 2 settings are for the optional port carrier cabinet.
Figure 1-24. Setting CMC carrier address ID (right side)
2. Proceed to either ‘‘Floor-mount the CMC cabinet’’ on page 1-57 or to
‘‘Wall-mount the CMC cabinets’’ on page 1-58.