Avaya DEFINITY ONE - Intuity AUDIX Administration; Intuity AUDIX Commands

Installation and Upgrades for DEFINITY ONE and
IP600 Internet Protocol Release 10
555-233-109
Issue 6
December 2001
System Initialization
3-48Intuity AUDIX administration
3
Intuity AUDIX administration
This section provides information about Intuity AUDIX commands and
administering Intuity AUDIX initialization. For additional information about Intuity
AUDIX administration, refer to the
AUDIX Administration PDF files on the
Documentation CD and
DEFINITY ONE Communications System AUDIX
Administration Command Line Quick Reference
Card (555-233-737).
Intuity AUDIX commands
Commands available to change system settings and subscriber information in the
Intuity AUDIX application are executable from the Intuity AUDIX command
prompt. Users access the Intuity AUDIX command prompt from the Avaya Site
Administration or Telnet interface. To view a list of commands, press F6, from the
command prompt. The following Intuity AUDIX screen displays:
Adding an Intuity AUDIX subscriber
After completing the machine level translations, subscribers must be added to the
DEFINITY ONE or IP600 system. The following forms detail the addition of Intuity
AUDIX subscribers. Enable the Intuity AUDIX forms via Avaya Site Administration
or Telnet.
1. Start at the Intuity AUDIX command prompt.
2. Enter the command Add Subscriber and the extension number that the
new subscriber will use.