Avaya DEFINITY ONE - Power up and Observe Leds; Connect the Laptop Computer to DEFINITY ONE or IP600; Start a Telnet Session

Installation and Upgrades for DEFINITY ONE and
IP600 Internet Protocol Release 10
555-233-109
Issue 6
December 2001
System Initialization
3-4Power up and observe LEDs
3
3. Add parameter value.
a. Double-click Directory
b. Enter “d:\lucentdata\tftproot” in the Value data box
c. Click OK
4. Exit regedit.
For information on administering TFTP, see Chapter 4 in
4600 Series IP
Telephone LAN Administrator’s Guide
, 555-233-507. This document is included
on the R10 CD.
Power up and observe LEDs
When power is first applied to DEFINITY ONE or IP600, or when the system
reboots, the LEDs on the TN2314 circuit pack light according to a predefined
sequence. See ‘‘LED boot sequence’’ on page E-1 for details on the power up
sequence.
Connect the laptop computer to
DEFINITY ONE or IP600
For this procedure, see ‘‘Connect the laptop computer to DEFINITY ONE or
IP600’’ on page 2-2.
Start a Telnet session
See ‘‘Via a Telnet session’’ on page 2-31 for an explanation of how to start a
Telnet session.