Avaya DEFINITY ONE - Settings for Modem Connected to the Data; Terminal Equipment (DTE)

Installation and Upgrades for DEFINITY ONE and
IP600 Internet Protocol Release 10
555-233-109
Issue 6
December 2001
Hardware Additions
6-23Add pooled modem
6
Settings for modem connected to the data
terminal equipment (DTE)
1.Type add station next and press Enter.
2.Type 2500 in the Type field.
3.Type the port assignment in the Port field and press
Enter.
NOTE:
1. Set speed to match remote modem. At least 1 speed must be set
ON.
NOTE:
2. Set to match remote modem.
Table 6-2. 7400A options — attention control modems
Set option display Option Setting
Set 300 Speed? 300 Note 1
Set 1200 Speed? 1200 Note 1
Set 2400 Speed? 2400 Note 1
Set 4800 Speed? 4800 Note 1
Set 9600 Speed? 9600 Note 1
Set 19200 Speed? 19200 Note 1
Set AT Control? AT ON
Set CI Lead? CI Note 2
Set CI2 Lead? CI2 Note 2
Set CH Lead CH Note 2
Set CH2 Lead? CH2 Note 2
Set LL Lead? LL Note 2
Set REMOTE Loop? REMLOOP Grant
Set RL Lead? RL Note 2
Set SIGLS Disc? SIGLS DISC ON
Set TM Lead? TM Note 2