Avaya DEFINITY ONE - Cable the Two-Cabinet Avaya IP600 System

Installation and Upgrades for DEFINITY ONE and
IP600 Internet Protocol Release 10
555-233-109
Issue 6
December 2001
Install and Cable the Cabinet
1-29Cable the Avaya IP600 system
1
Cable the two-cabinet Avaya IP600 system
NOTE:
Use the same process to add a third cabinet.
1. Remove the bottom panel and fan assembly from Cabinet B (port cabinet).
2. Remove the fan assembly from Cabinet A (processor cabinet).
3. Remove the right TDM/LAN bus terminator from Cabinet A, and install it at
the left end of the TDM/LAN bus on Cabinet B. See Figure 1-14 on page
1-30.
!
WARNING:
Make sure to install TDM/LAN bus terminators with the arrow on the
back pointing upward.