Installation and Upgrades for DEFINITY ONE and
IP600 Internet Protocol Release 10
555-233-109
Issue 6
December 2001
Install and Cable the Cabinet
1-94Install equipment room hardware for DEFINITY ONE
1
Label the main distribution frame
Figure 1-44 shows the graphic symbols used on the supplied labels for the
system, cross-connections, information outlets, and cables.
1. Write the floor and building identification on each label as required.
2. Insert the labels into the plastic holders.
3. Snap the holders into the appropriate locations on the MDF.
Figure 1-44. Label graphic symbols and nomenclature
4. Label the cables as required using the supplied labels. Label code number
220A (comcode 103970000) contains all required labels.
Figure Notes
1. Floor and building identification
2. Cabinet
3. Carrier
4. Slot
5. Information outlet
6. Site/satellite closet
7. Tie circuit
8. Floor
9. Building
r758422i LJK 050996
To Next Page
Loading...
