Installation and Upgrades for DEFINITY ONE and
IP600 Internet Protocol Release 10
555-233-109
Issue 6
December 2001
Install and Cable the Cabinet
1-37Install equipment room hardware for Avaya IP600
1
Install equipment room hardware for
Avaya IP600
See
DEFINITY Communications System Generic 1 and Generic 3 Main
Distribution Field Design
(555-230-630) for more information.
Cross-connect the cabinet to the patch panels
1. Cross-connect the port circuit packs to the Avaya IP600 patch panels (or
other standard 110A cross-connect equipment). See Figure 1-19 on page
1-45.
Allowable circuit packs
Table 1-4 lists the circuit packs that can be used with Avaya IP600. (Table 1-5 lists
the circuit packs that cannot be used with Avaya IP600)
Table 1-4. Allowable Circuit Packs and Circuit Modules
Apparatus
code Name Allowable
650A AC Power Unit Yes
NAA1 Fiber Optic Cable Adapter Circuit Pack Yes
TN417 Auxiliary Trunk Yes
TN429/B/C/D Analog Direct Inward/Outward Dialing (DIOD) Central
Office Trunk
Yes
TN429C Analog Central Office Trunk Yes
TN429D Analog DIOD Trunk - Analog Loop Start Yes
TN433 Speech Synthesizer Yes
TN436B Direct Inward Dialing Trunk Yes
TN437B Tie Trunk Australia (future availability) Yes
TN438B Central Office Trunk Yes
TN439 Tie Trunk Yes
TN447 Central Office Trunk Yes
TN457 Speech Synthesizer Yes
TN459B Direct Inward Dialing Trunk Yes
TN464GP DS1 Interface - T1, 24 Channel - E1, 32 Channel Yes
Continued on next page
To Next Page
Loading...
