Installation and Upgrades for DEFINITY ONE and
IP600 Internet Protocol Release 10
555-233-109
Issue 6
December 2001
Upgrade and Repair Procedures
5-13Access Diskeeper software to defragment the disk
5
Access Diskeeper software to defragment
the disk
NOTE:
Do not schedule defragmentation to occur during scheduled DEFINITY
IP600 maintenance. Open a SAT session and type change
system-parameters maintenance and press
Enter. Note the scheduled
maintenance times.
Diskeeper software automatically defragments the disk. The C drive is
defragmented once every Sunday at 3:00 a.m., and the D drive once every day
between 2:00 a.m. and 4:00 a.m. You can change these times.
Change the default times on Diskeeper
1. From the DEFINITY ONE or IP600 desktop, click Start > Programs >
Executive Software Diskeeper.
The Diskeeper menu displays.
2. Select Action > Set It and Forget It.
3. Select Partition Scheduler.
4. Select Set It and Forget It - Partition Scheduling window displays.
5. Set new times for automatic defragging. This changes the default times.
6. Click Start.
7. Click Close.
To Next Page
Loading...
