Installation and Upgrades for DEFINITY ONE and
IP600 Internet Protocol Release 10
555-233-109
Issue 6
December 2001
Miscellaneous Procedures
C-4Connect to SAT session via Telnet
C
The screen shows login and password fields. You are automatically logged
in to the DEFINITY SAT session by the LAC.
NOTE:
Three new terminal types have been added: NTT, W2KTT, and
SUNT. W2KTT uses different function key sequences, see....
■ Use NTT from a Windows platform.
■ Use W2KTT from a Windows 2000 platform.
■ Use SUNT from a Sun Microsystems platform.
The following screen displays when the terminal type is entered:
Once you are logged in as user lucent1, lucent2, or lucent3, you can exit the
DEFINITY SAT session and start an Intuity AUDIX session without having to
re-authenticate.
Function key sequences for W2KTT terminal type
You cannot use the same function key sequences for SAT on a Windows 2000
platform. However, the 4 arrow keys do work as expected.
NOTE:
Function keys are case sensitive. For example, Esc p and Esc P produce
two different results.
To Next Page
Loading...
