Installation and Upgrades for DEFINITY ONE and
IP600 Internet Protocol Release 10
555-233-109
Issue 6
December 2001
Connectivity and Access to DEFINITY ONE or IP600
2-28Creating physical connections
2
13. Leave the domain entry blank and click OK.
After a connection is established, a dialog box similar to the following
displays:
This indicates that the laptop is connected to the DEFINITY ONE or IP600
LAN. The dial-up connection is established.
Once the dial-up connection is established, the caller must use 1 of 3
access methods. See ‘‘Access methods’’ on page 2-31.
Creating a physical connection via customer LAN
Customers may decide to install their LAN, which connects to the ethernet jack of
the processor interface cable. To configure DEFINITY ONE or IP600 as a node on
the customer’s network, see ‘‘Administer customer’s LAN interface’’ on page 3-25.
To Next Page
Loading...
