Installation and Upgrades for DEFINITY ONE and
IP600 Internet Protocol Release 10
555-233-109
Issue 6
December 2001
Install and Cable the Cabinet
1-11Install the Avaya IP600 system cabinet
1
Install the Avaya IP600 system cabinet
!
WARNING:
Make sure there is adequate ventilation in the area. The internal room temperature
must not exceed 50
o
C (122
o
F).
Avaya IP600 cabinets can be floor-mounted or rack-mounted. Set the Carrier
Address ID either before or after installing each RMC.
!
WARNING:
It is very important to align the cabinet with the correct holes in the frame because the
distance between each varies. To aid your installation of the rack-mounted cabinet,
print a copy of the IP600 Mounting Template provided on this CD. Print the template on
11” x 17” paper, so you can use it as an actual template.
Verify the carrier address ID on RMC cabinets
1. Loosen the thumb screws on the fan assembly and pull it straight out as
shown in Figure 1-3.
Figure 1-3. Fan assembly removal
fndpremv LJK 102600
To Next Page
Loading...
