Installation and Upgrades for DEFINITY ONE and
IP600 Internet Protocol Release 10
555-233-109
Issue 6
December 2001
Install and Cable the Cabinet
1-12Install the Avaya IP600 system cabinet
1
2. Verify and, if necessary, set the carrier address ID for each cabinet as
shown in Figure 1-4. Cabinet A settings are for the processor cabinet.
Cabinet B settings are for the optional port carrier cabinet.
Figure 1-4. Setting RMC carrier address ID
3. Proceed to either ‘‘Floor-mount the Avaya IP600 cabinet’’ on page 1-13 or
‘‘Rack-mount the Avaya IP600 cabinet’’ on page 1-14.
To Next Page
Loading...
