Avaya DEFINITY ONE - Install Equipment Room Hardware for DEFINITY ONE; Cross-Connect the Cabinet to the MDF; Allowable Circuit Packs

To Next Page

To Previous Page

Installation and Upgrades for DEFINITY ONE and

IP600 Internet Protocol Release 10

555-233-109

Issue 6

December 2001

Install and Cable the Cabinet

1-80Install equipment room hardware for DEFINITY ONE

Install equipment room hardware for

DEFINITY ONE

See

DEFINITY Communications System Generic 1 and Generic 3 Main

Distribution Field Design

(555-230-630) for more information.

Cross-connect the cabinet to the MDF

1. Cross-connect the port circuit packs to the DEFINITY ONE MDF. See

Figure 1-42 on page 1-89.

Allowable circuit packs

Table 1-9 lists the circuit packs that can be used with DEFINITY ONE. (Table 1-10

lists the circuit packs that cannot be used with DEFINITY ONE)

Table 1-9. Allowable Circuit Packs and Circuit Modules

Apparatus

code Name Allowable

650A AC Power Unit Yes

NAA1 Fiber Optic Cable Adapter Circuit Pack Yes

TN417 Auxiliary Trunk Yes

TN429/B/C/D Analog Direct Inward/Outward Dialing (DIOD) Central

Office Trunk

Yes

TN429C Analog Central Office Trunk Yes

TN429D Analog DIOD Trunk - Analog Loop Start Yes

TN433 Speech Synthesizer Yes

TN436B Direct Inward Dialing Trunk Yes

TN437B Tie Trunk Australia (future availability) Yes

TN438B Central Office Trunk Yes

TN439 Tie Trunk Yes

TN447 Central Office Trunk Yes

TN457 Speech Synthesizer Yes

TN459B Direct Inward Dialing Trunk Yes

TN464GP DS1 Interface - T1, 24 Channel - E1, 32 Channel Yes

Continued on next page

Related product manuals