Installation and Upgrades for DEFINITY ONE and
IP600 Internet Protocol Release 10
555-233-109
Issue 6
December 2001
System Initialization
3-56Administer SNMP
3
Administer SNMP
The SNMP agent is installed with DEFINITY ONE or IP600. By default, SNMP is
enabled. See ‘‘Enable and Disable SNMP’’ on page 3-27 for more information
about enabling and disabling SNMP.
You can configure SNMP trap destinations, configure community strings, and start
and stop the SNMP subagent process. After the SNMP agent is configured, and
with Network Management System Interface (NMSI) software installed, a network
manager can monitor DEFINITY ONE or IP600 devices. The NMSI software can
automatically discover the DEFINITY ONE or IP600 devices in the network and
display icons for them in an NMS IP map.
Configure SNMP trap destinations
To configure SNMP trap destinations:
1. From the DEFINITY ONE or IP600 home page, click SNMP Subagent
Administration.
The following page displays:
To Next Page
Loading...
