Installation and Upgrades for DEFINITY ONE and
IP600 Internet Protocol Release 10
555-233-109
Issue 6
December 2001
Miscellaneous Procedures
C-3Connect to SAT session via Telnet
C
Connect to SAT session via Telnet
This method of access is used primarily by technicians who use one of the ser-
vices logins. This connection type will access a SAT emulator to administer and
maintain the DEFINITY ONE or IP600.
1. Enter a command to continue after admittance in to the DEFINITY ONE or
IP600 system. See ‘‘Via a Telnet session’’ on page 2-31. In this example,
the command entered was definity. The next screen shows the initial
DEFINITY SAT screen.
2. Enter the terminal type.
To Next Page
Loading...
