Installation and Upgrades for DEFINITY ONE and
IP600 Internet Protocol Release 10
555-233-109
Issue 6
December 2001
Intuity AUDIX Digital Networking
4-2Initial administration tasks
4
Initial administration tasks
To perform initial administration, complete the tasks shown in sequential order in
Table 4-1 on page 4-2. Confirm that each of the tasks are performed, as some
may have been completed by the technician at installation.
The design center provides information for completing digital networking
administration. Ensure that you have design center specifications for TCP/IP,
network channels, the local machine, and all remote machines.
Table 4-1. Initial administration tasks
Task Description
Screens, windows, or
commands
Complete Windows and switch
administration (normally done
by the technician at the time of
installation).
Define the machine name,
TCP/IP address, and the switch
to work with AUDIX digital
networking.
Windows Settings screens
and Switch screens
View digital networking settings.
See ‘‘Viewing the Feature
Options window’’ on page 4-4.
Verify that the purchased digital
networking options are correctly
displayed.
List Configuration window
Verify or change the number of
administered remote users
(normally done by the
technician at the time of
installation). See ‘‘Changing the
number of administered remote
users’’ on page 4-5.
Define the number of
administered remote users to be
equal to or greater than the
number of all mailboxes on all
remote systems.
System Parameters Limits
screen
Administer network channels
(normally done by the
technician at the time of
installation). See ‘‘Administering
networking channels’’ on page
4-6.
Enable the channels to create a
communication link between the
ACCX card and the switch or the
LAN card and the LAN.
Networking Channel
Administration window
Change the local machine. See
‘‘Changing local machine
information’’ on page 4-7.
Define local machine
information for digital
networking.
Machine Profile screen;
Local Machine Administration
window
Add a remote machine or
change a remote machine
(normally done by the
technician at the time of
installation). See ‘‘Adding a
remote machine’’ on page 4-12.
On the local machine, define
information about each remote
machine, including the machine
name, password, connection
type, and dial string.
Digital Network Machine
Administration window;
Machine Profile screen
Continued on next page
To Next Page
Loading...
