Installation and Upgrades for DEFINITY ONE and
IP600 Internet Protocol Release 10
555-233-109
Issue 6
December 2001
Install and Cable the Cabinet
1-13Install the Avaya IP600 system cabinet
1
Floor-mount the Avaya IP600 cabinet
NOTE:
A single RMC can be floor-mounted or rack-mounted. Double and Triple
RMC systems must be rack-mounted.
!
WARNING:
Do not stack one RMC on top of another on the floor.
1. Screw in the feet at the base of the cabinet as shown in Figure 1-5.
Figure 1-5. Floor-mounting the RMC
2. Locate the cabinet on the floor.
3. Proceed to ‘‘Check AC power and ground for Avaya IP600I’’ on page 1-19.
indptabl LJK 102600
1
0
1
2
3
4
5
6
7
8
9
P
o
w
e
r
To Next Page
Loading...
