Avaya DEFINITY ONE - Set Country Options

Installation and Upgrades for DEFINITY ONE and
IP600 Internet Protocol Release 10
555-233-109
Issue 6
December 2001
System Initialization
3-28Administer DEFINITY ONE or IP600
3
Set country options
Some of the country options must be set on the change system parameters
country options screen, displayed below, to turn off the red alarm LEDs.
1. Enter change system-parameters country options and press E
NTER.
A screen similar to the following displays:
The default (United States) companding mode is Mu-Law. If the country uses
A-Law companding, proceed to the next step.
2. Enter A-Law.
3. Click E
NTER.
NOTE:
Other items eventually need to be entered on this screen, but this is all that
is needed to turn the red alarm LEDs off.