Installation and Upgrades for DEFINITY ONE and
IP600 Internet Protocol Release 10
555-233-109
Issue 6
December 2001
Connectivity and Access to DEFINITY ONE or IP600
2-37Access methods
2
Dialin permissions to an existing login
The system administrator can give dialin permissions to an existing login by the
following procedure:
1. Go to Start> Programs> Administrative Tools (Common).
2. Click User Manager.
3. Double-click on an existing login that will be dialing in.
4. At the bottom of the
User Properties
window, click on the Dialin icon.
5. Select the
Grant dialin permission to user
and
No Call Back
options, and
click OK.
6. Click OK, and again in the
User Properties
window.
7. Exit User Manager.
Creating a login for remote access
The system administrator can create a login for remote access as follows:
1. Go to Start> Programs> Administrative Tools (Common).
2. Click User Manager.
3. On the top toolbar, click on User, and select
New User
.
4. In the dialog box, assign the
Username
(this is the login) and the
Password
.
NOTE:
Full Name and Description are optional. The Options check boxes
are the customer’s choice, but it is recommended that
User Cannot
Change Password
and
Password Never Expires
should be the only
ones checked.
5. Click on Groups at the bottom of the dialog box.
6. Make the login a member of
officeadmin
and
Users groups
, and click OK.
7. Click on Dialin at the bottom of the dialog box.
8. Check the
Grant dialin permissions
and
No Call Back
boxes, and click OK.
9. Click OK in the
New User
dialog box.
10. Close User Manager.
To Next Page
Loading...
