Installation and Upgrades for DEFINITY ONE and
IP600 Internet Protocol Release 10
555-233-109
Issue 6
December 2001
Install and Cable the Cabinet
1-69Check AC power and ground for DEFINITY ONE
1
2. Connect the cable as shown in Figure 1-33 for a DEFINITY ONE single
cabinet, Figure 1-34 on page 1-70 for two DEFINITY ONE cabinets.
Figure 1-33. Typical single-cabinet CMC grounding
Figure Notes
1. 6 AWG (#40) (16 mm
2
) cabinet
ground wire
2. Single-point ground block
3. AC load center single-point
ground
4. 10 AWG (#25) (6 mm
2
) wire to
coupled bonding conductor (CBC)
5. 6 AWG (#40) (16 mm
2
) ground wire
from single-point ground block to the
AC load center single-point ground
4
cadmgrd2 KLC 091499
1
2
3
5