Installation and Upgrades for DEFINITY ONE and
IP600 Internet Protocol Release 10
555-233-109
Issue 6
December 2001
Install and Cable the Cabinet
1-102Install and wire telephones and other equipment
1
Analog tie trunk example
Figure 1-50. Analog tie trunk cross-connect
1. Before installing the Tie Trunk circuit pack, set the option switches as
described in Chapter 1, ‘‘Install and Cable the Cabinet’’.
2. Install cross-connect jumpers to connect the pins from the Tie Trunk circuit
pack to the appropriate leads on the external tie trunk. Determine names of
the tie trunk leads from the manufacturer or supplier of the external trunk
circuit. The example in Figure 1-50 shows a DEFINITY or Avaya IP600
System tie trunk connected to a DEFINITY or Avaya IP600 System tie
trunk.
3. Administer on the Trunk Group screen. See
DEFINITY Enterprise
Communications Server Release 10 Administrator’s Guide
(555-233-506).
Figure Notes
1. External trunk or adapter 2. Tie trunk circuit pack
tie_wire RBP 040596
1
27
26
29
4
30
5
2
28
3
31
6
T1
R1
T11
R11
E1
M1
T2
R2
T12
R12
E2
M2
To Next Page
Loading...
