Avaya DEFINITY ONE - Page 147

Installation and Upgrades for DEFINITY ONE and
IP600 Internet Protocol Release 10
555-233-109
Issue 6
December 2001
Install and Cable the Cabinet
1-107Install and wire telephones and other equipment
1
Adjunct power connections
Figure 1-54 shows typical connection locations for adjunct power.
Figure 1-54. Example adjunct power connections
Figure Notes
1. Typical display telephone
2. Individual power supply (such as 1151A,
not used if item 14 is used)
3. 400B2 adapter
4. Information outlet (modular jack)
5. 4-pair D-Inside Wire (DIW) cable
6. Satellite site or adapter location
7. 25-pair D-Inside Wire (DIW) cable
8. Station side of MDF or patch panel
9. 100P6A patch cord or jumpers
10. System side of MDF or patch panel
11. 25-pair cable to digital line circuit pack
12. Equipment room
13. Satellite location
14. Bulk power supply (such as 1145B).
Install at satellite location or equipment
room (not both).
cydmapwr EWS 052898
1
2
3
4
5
6
7
8
9
10
11
12
13
14
14