Installation and Upgrades for DEFINITY ONE and
IP600 Internet Protocol Release 10
555-233-109
Issue 6
December 2001
Connectivity and Access to DEFINITY ONE or IP600
2-32Access methods
2
1. On the laptop, click Start > Run from the Windows task bar. The Run
dialog box displays.
If you are using a PCMCIA direct connection, continue to step 2.
2. Enter telnet
DEFINITY ONE or IP600 IP Address
. Click OK.
A Telnet session opens on your desktop.
NOTE:
There are 2 different scenarios, depending on whether the license file has
already been installed.
a. If no license file is installed, you are prompted for your login and
password. The only valid login is lucent3. Use the appropriate
password and continue to step 3.
To Next Page
Loading...
