Avaya DEFINITY ONE - Page 244

Installation and Upgrades for DEFINITY ONE and
IP600 Internet Protocol Release 10
555-233-109
Issue 6
December 2001
System Initialization
3-26Administer DEFINITY ONE or IP600
3
5. Enter: d1stat
Confirm the following results:
CornerStone PARTIALLY UP
Audix DOWN
AudixNet DOWN
If any of these 3 systems are still UP, repeat steps 3 to 5.
6. Enter: cd //c/lucentsoftware/cornerstone/asp/dsp0
This moves you to the directory where the active tone detector file is,
dsp0.USA.
7. Enter pwd to confirm you are in the correct directory.
The path of the current directory displays.
8. To verify the mvdsp.sh script is present, enter: ls
If you do not see mvdsp.sh, contact Tier 3/4 personnel for assistance.
9. Enter./mvdsp.sh to execute the mvdsp.sh script.
The following line displays:
Select dsp file [AUSTRALIA|BRAZIL|CANADA|MEXICO|UK|OTHER]:
NOTE:
You can exit from the script at any time by pressing Ctrl C.
10. In all capital letters, enter one of the displayed countries or OTHER.
If you entered OTHER, you are prompted to enter the name of your country
in all capital letters. Make certain a tone detector file exists for your country
and you enter it correctly.
NOTE:
If you enter in an unrecognized country, you are returned to the
prompt to enter a valid country name.
The call processing tone translation file for your country is copied into
dsp0.USA. A copy of your old dsp0.USA file is saved in dsp0.USA.sav in
case you need to restore these settings.
You are successful when the “dsp file successfully copied” message
displays. It is now safe to start CornerStone and Audix.
11. Use the log file to confirm successful completion.
12. Enter: start CornerStone
The message “addproc succeeded” displays upon successful completion.
This command will start Audix as well as CornerStone.
13. Enter d1stat to confirm that CornerStone and Audix are UP.
Call processing will now be based on the tones specific to your country.