Installation and Upgrades for DEFINITY ONE and
IP600 Internet Protocol Release 10
555-233-109
Issue 6
December 2001
Avaya Site Administration
7-17Configure Avaya Site Administration
7
3. Click Add. The Connection Properties dialog box displays. The
Connection Properties dialog box is used to add a physical connection
mechanism from the client machine to the DEFINITY ONE or IP600.
NOTE:
Regardless of the physical connection used (local monitor/keyboard/mouse,
PCMCIA, RAS modem or customer LAN) the connection type is always a
network connection.
4. By default the Modem or data module connection radio button is
highlighted. Be sure to click on the Network connection radio button.
5. Host: For the host address, enter the IP address that is commensurate with
the physical connection mechanism used to connect to the DEFINITY ONE
or IP600. See Appendix H, ‘‘Installation Connectivity Quick Reference’’.
6. Port: For the port number, ALWAYS use port 23.
To Next Page
Loading...
