Installation and Upgrades for DEFINITY ONE and
IP600 Internet Protocol Release 10
555-233-109
Issue 6
December 2001
Miscellaneous Procedures
C-13Perform backup
C
Enter Backup Commands
1. Type d1backup <data-set> <destination> and press .
2. Enter one or more of the following data-set parameters (separate multiple
choices with a space) for backup:
The destination is pcmcia to backup to a flash card, or a directory name to
backup to a remote hard disk on the LAN.
If a directory name is entered, a network drive must be mapped as the F:
drive. Use the web interface to map a network drive.
The following is an example of how to enter information for backup
procedures:
LAC:> d1backup deftran vmnamtran pcmcia
NOTE:
When executing this command, there may be a delay of 1 to 2
minutes because Intuity AUDIX Networking is shutting down and
auditing the Intuity AUDIX databases. Intuity AUDIX restarts when
the backup completes.
Parameter Meaning
deftran DEFINITY Translations
vmnamtran Voice Names and Translations
vmmsgtran Message Bodies and Translations
vmannounce Announcement Sets
vmnammsgtran Voice Names, Messages, and Translations
registry NT registry
sam NT Passwords Login and Policy
defann DEFINITY Announcements
lac Password and License Server File
ENTER
To Next Page
Loading...
