Avaya JEM24 Installing

Parameter name Default value Description
ELD_SYSNUM 1 Specifies whether enhanced local dialing
algorithm will be applied for system numbers.
Value operation:
• 0: Disable enhanced local dialing for system
numbers.
• 1: Enable enhanced local dialing for system
numbers.
ENHDIALSTAT 1 Specifies if the algorithm defined by the
parameter is used during certain dialing
behaviors.
Value operation:
• 0: Disables algorithm.
• 1: Enables algorithm, but not for contacts.
• 2: Enables algorithm, including contacts.
PHNCC 1 Specifies the international country code of the
Communication Manager call server. For
example, 1 for the United States, 44 for the
United Kingdom, and so on.
Valid values are from 1 to 999.
PHNDPLENGTH 5 Specifies the internal dial plan number length.
For example, if the extension number is 12345,
then the dial plan length is 5.
This value must match the extension length set
on your call server.
Valid values are from 3 to 13.
PHNIC 011 Specifies the international access code.
Valid values are from 0 to 4 characters such as
numbers 0–9, and special symbols such as star
key (*), and pound key (#).
PHNLD 1 Specifies long distance access code.
Valid values are from 0 through 9 and empty
string.
PHNLDLENGTH 10 Specifies the maximum length, in digits, of the
national telephone number for the country in
which the Communication Manager call server is
located.
For example, 800-555-1111 has a length of 10.
Valid values are from 5 to 15.
PHNOL 9 Specifies the outside line access code.
Table continues…
Administering enhanced local dialing
December 2018 Installing and Administering Avaya J100 Series IP Phones 151
Comments on this document? infodev@avaya.com

Avaya JEM24 Specifications

General

Brand	Avaya
Model	JEM24
Category	IP Phone
Language	English