Avaya JEM24 Installing

Parameter name Default
value
Description
Valid values are from 5 min. to
1440 min.
ADMIN_PASSWORD 27238 Specifies an access code for
accessing the Admin menu.
Valid values are from 6 to 31
alphanumeric characters including
upper case, lower case characters
and special characters. However,
double quote character (“) cannot
be used for a value of this
parameter.
Note:
• If this parameter length is set
below 6 or above 31
alphanumeric characters,
then the parameter is treated
as not defined.
• If this parameter is set in the
46xxsettings.txt file,
then it replaces
PROCPSWD parameter.
• If you set
ADMIN_PASSWORD in the
Avaya Aura
®
System
Manager you require at least
Avaya Aura
®
System
Manager 7.1.0.
• Setting this parameter
through PPM is more secure
because this file can usually
be accessed and read by
anyone on the network.
Setting the value in this file
is intended primarily for
configurations with versions
of phone or if server
software that do not support
setting this value from the
server.
AGCHAND
1 Specifies the status of Automatic
Gain Control (AGC) for the
handset.
Table continues…
List of configuration parameters
December 2018 Installing and Administering Avaya J100 Series IP Phones 195
Comments on this document? infodev@avaya.com

Avaya JEM24 Specifications

General

Brand	Avaya
Model	JEM24
Category	IP Phone
Language	English