Avaya JEM24 Installing

Parameter name Default
value
Description
Value Operation:
• 0: Disables AGC for the handset.
• 1: Enables AGC for the handset.
AGCHEAD 1 Specifies the status of Automatic
Gain Control (AGC) for the
headset.
Value Operation:
• 0: Disables AGC for the headset.
• 1: Enables AGC for the headset.
AGCSPKR 1 Specifies the status of Automatic
Gain Control (AGC) for the speaker.
Value Operation:
• 0: Disables AGC for the speaker.
• 1: Enables AGC for the speaker.
ALLOW_DND_SAC_LINK_CHANGE 0 Specifies whether to enable DND
and SAC link button in the menu.
Value Operation:
• 0: To disable DND and SAC link
button.
• 1: To enable DND and SAC link
button.
Note:
Only Avaya J169/J179 IP
Phone supports this feature.
ASTCONFIRMATION 60 Specifies the number of seconds
that the phone waits to validate an
active subscription when it
subscribes to the avaya-cm-
feature-status package.
Valid values are 16 through 3600.
This parameter is not supported in
IP Office environment as there is no
subscription to Avaya-cm-feature-
status.
AUDASYS 3 Specifies the audible alerting
setting for the phone.
Table continues…
Appendix
December 2018 Installing and Administering Avaya J100 Series IP Phones 196
Comments on this document? infodev@avaya.com

Avaya JEM24 Specifications

General

Brand	Avaya
Model	JEM24
Category	IP Phone
Language	English