Avaya JEM24 Installing

Name Description
The options are:
• Yes (default): To use the assigned IP address after the DHCP lease
expires.
• No: To stop using the assigned IP address after the DHCP lease
expires.
IPv4 Address Specifies the IP address of the phone. You can enter the IP address in
this field.
The valid value is an IP address in the dotted decimal name format.
The maximum number of characters is 15.
Subnet Mask Specifies the network mask address. To assign the network mask
address manually to your phone, type the address in this field.
The valid value is an IP address in the dotted decimal name format.
The maximum number of characters is 15.
IPv4 Gateway Specifies the IP address of the gateway.
The valid value is an IP address in the dotted decimal name format.
The maximum number of characters is 15.
IPv6 Configuration
DHCPv6 Client Status Specifies whether DHCPv6 Client is enabled or disabled.
The options are:
• DHCPv6 client enabled (default)
• DHCPv6 client disabled
Use DHCPv6 Specifies whether to use DHCPv6 as a source in IPv6 network.
The options are:
• Yes (default): To assign the IPv4 address automatically to your
phone.
• No: To assign the IPv4 address manually to your phone.
Continue to use DHCPv6
information after lease expiry
Specifies whether the DHCPv6 will comply with the IETF RFC 3155
standard and immediately stop using an IPv6 address if the address
valid lifetime expires.
The options are:
• Yes (default)
• No
IPv6 Address Specifies the IPv6 address of the phone.
Value format: eight groups of four hexadecimal digits. The default value
is null.
IPv6 Link Local Address Specifies the link local address.
Table continues…
Configuring the phone using web interface
December 2018 Installing and Administering Avaya J100 Series IP Phones 48
Comments on this document? infodev@avaya.com

Avaya JEM24 Specifications

General

Brand	Avaya
Model	JEM24
Category	IP Phone
Language	English