Avaya JEM24 Installing

Name Description
Value format: eight groups of four hexadecimal digits. The default value
is null.
IPv6 Gateway Specifies the IP address of the gateway.
Value format: eight groups of four hexadecimal digits. The default value
is null.
Use SLAAC Specifies whether to use Stateless Auto-Configuration.
The options are:
• Yes (default)
• No
Privacy SLAAC Mode Specifies the preference for Privacy Extensions in SLAAC.
The options are:
• Disabled, stable address generated from MAC
• Stable private address (default)
• Temporary address
SLAAC Addresses SLAAC (stateless auto configuration) IPv6 addresses.
Value format: eight groups of four hexadecimal digits. The default value
is null.
802.1X Supplicant Operating Mode
Supplicant Operating Mode Specifies the 802.1X supplicant operating mode.
The options are:
• Disable (default)
• Enable (responds only to unicast EAPOL messages)
• Enable (responds to unicast and multicast EAPOL messages)
802.1x Pass-through
Operating Mode
Specifies the 802.1X pass-through operating mode.
Pass-through refers to the forwarding of EAPOL frames between the
phone's Ethernet line interface and the secondary PC Ethernet
interface.
The options are:
• Without proxy logoff (default)
• With proxy logoff
• Disabled
Authentication Method Specifies the authentication method to be used by 802.1X.
The options are:
• MD5 (default)
• TLS
Table continues…
Configuring Ethernet settings
December 2018 Installing and Administering Avaya J100 Series IP Phones 49
Comments on this document? infodev@avaya.com

Avaya JEM24 Specifications

General

Brand	Avaya
Model	JEM24
Category	IP Phone
Language	English