Avaya JEM24 Installing

Name Description
Enable Phone Lock Specifies whether the Lock feature is enabled on the phone.
The options are:
• Do Not Allow (default)
• Allow
Phone Lock Idle Time Specifies the idle time in minutes after which the phone is
locked.
The valid value is an integer from 0 to 10080. The default value
is 0 minutes.
Other
Softkey Configuration Specifies which feature will show up on which softkey on the
phone screen.
Note:
This setting applies only to Avaya J129 IP Phone.
The following numbers are assigned to the features:
• 0 – Redial
• 1 – Contacts
• 2 – Emergency
• 3 – Recents
• 4 – Voicemail
Value format: numbers from 0 to 4 and a comma (,).
The default value is “0,1,2”.
Branding Volume Specifies the volume level at which the Avaya audio brand is
played.
The options are:
• 12db below nominal
• 9db below nominal
• 6db below nominal
• 3db below nominal
• Nominal (default)
• 3db above nominal
• 6db above nominal
• 9db above nominal
Phone Mute Alert Specifies whether the Mute Alert feature is blocked.
Table continues…
Configuring the phone using web interface
December 2018 Installing and Administering Avaya J100 Series IP Phones 72
Comments on this document? infodev@avaya.com

Avaya JEM24 Specifications

General

Brand	Avaya
Model	JEM24
Category	IP Phone
Language	English