Avaya JEM24 Installing

Name Description
Remove PSTN access prefix from
outgoing number
Allows dialing digits during failover and removing of the PSTN
access prefix from the outgoing number.
The options are:
• No (default)
• Yes
Admin
Admin Access allowed from Phone Specifies whether the craft procedures are used for the phone
configuration.
The options are:
• Yes (default)
• No
Admin Login fail attempt allowed Specifies the number of failed attempts to enter the
Administration access code before the login is locked.
The options are from 1 to 20. The default value is 10.
Admin Login Locked Time after fail
attempt
Specifies the time interval in minutes to re-enter the
Administration access code after the login is locked.
The valid value is an integer from 5 to 1440. The default value
is 10 minutes.
MLPP
Enable MLPP Specifies whether the MLPP feature is enabled.
The options are:
• Disable (default)
• Enable
Maximum Precedence Level Specifies the maximal allowed precedence level for the user.
The options are from 1 to 5. The default value is 1.
MLPP Network Domain Specifies the MLPP Network Domain.
The valid values are: empty, “uc” and “dsn”. The default value is
empty.
MLPP Precedence Domain Specifies the MLPP Precedence Domain.
The valid value is a sting of alphanumeric characters. The
default value is “000000”.
Enable Precedence Softkey Controls whether the Precedence soft key should be displayed
on idle line appearances on the phone screen.
The options are:
• Disable
• Enable (default)
Table continues…
Configuring the phone using web interface
December 2018 Installing and Administering Avaya J100 Series IP Phones 76
Comments on this document? infodev@avaya.com

Avaya JEM24 Specifications

General

Brand	Avaya
Model	JEM24
Category	IP Phone
Language	English