Avaya JEM24 Installing

Name Description
Dial Local Area Code Specifies whether the user must dial the area code of calls
within the same area code regions.
The options are:
• No (default)
• Yes
Local Area Code Indicates the phone local area code which allows the user to
dial local numbers with more flexibility.
The valid value is a sting of 5 digits ranged from 0 to 9. The
default value is empty.
Enhanced Local Dialing Rules
Enable Local Dialing Rules Specifies whether the algorithm defined by parameters in this
section is used during certain dialing procedures.
The options are:
• Disable
• Enable without Contacts (default)
• Enable with Contacts
Country Code Specifies the country code of the phone.
The valid value is an integer from 1 to 999. The default value is
1.
International Access Code Specifies the international access code.
The valid value is up to 4 dialable characters. The default value
is 011.
Value format: digits from 0 to 9, *, #.
Long Distance Access Code Specifies the long distance access code.
The valid value range is a sting of integers from 0 to 9, and
empty. The default value is 1.
Internal Extension Number Length Specifies the length of an internal extension number.
The valid value is an integer from 3 to 13. The default value is
5.
National Telephone Number Length Specifies the length of a national phone number.
The valid value is an integer from 5 to 15. The default value is
10.
Outside Line Access Code Specifies the number for making an outside call, i.e. a local call
in a public network.
The valid value is up to 2 dialable characters. The default value
is 9.
Value format: digits from 0 to 9, *, #.
Table continues…
Configuring Settings
December 2018 Installing and Administering Avaya J100 Series IP Phones 75
Comments on this document? infodev@avaya.com

Avaya JEM24 Specifications

General

Brand	Avaya
Model	JEM24
Category	IP Phone
Language	English