Azbil VDC User Manual

Azbil Corporation Operation using the data setting device
Model MTG11A/18A, MTG11B/18B, MTG14C 5-5
5-2 : Functions of the data setting device
5-2-1 : Data setting device
Name of parts
Names and Descriptions of Parts
This section describes displays shown on the data setting device.
• Flow rate display
The flow rate display is given at three stages:% flow rate, actual flow rate and
totalized value. Operating the key, the main display to be shown at the top stage
can be set selecting from the actual flow rate, % flow rate and totalized value.
RATE appears for the actual flow rate display, % for the % flow rate display, and
TOTAL for the totalized value display (see “5-3-1 : Display overview”.).
Area Description
Main display
7-segment 8-digit display
Displays the flow rate display selected for the main display
by DISP SELECT in OPERATOR'S MODE.
% flow rate display mark (%) Displays when % flow rate is shown for the main display.
Actual flow rate display mark
(RATE)
Displays when the actual flow rate is shown for the main
display.
Totalized value display mark
(TOTAL)
Displays when the totalized value is shown for the main
display.
Sub display
• In MEASURING MODE, shows a flow rate display
other than a flow rate display selected for the main
display by DISP SELECT in OPERATOR'S
MODE.
• In modes other than MEASURING MODE, indicate
procedures for setting and adjusting parameters.
7-segment 8-digit display
Main display
Sub display
Mode key
Right shift key
Decrement key
Increment key
Actual flow rate display mark
% flow rate display mark
Totalizer display mark
CM2-MTG300-2001.book 5 ページ ２０１５年９月２９日 火曜日 午前１０時１４分

Azbil VDC Specifications

General

Brand	Azbil
Model	VDC
Category	Measuring Instruments
Language	English