Azbil VDC User Manual

Azbil Corporation Operation using the data setting device
Model MTG11A/18A, MTG11B/18B, MTG14C 6-27
Displaying transmitting output: OUTPUT key
Procedure
Use the following procedure to be able to read the current output value from the
converter to the SFC.
Step Key Procedure SFC screen
1 Make sure that the SFC is set to
“READY”.
If it is not, press the key to set it
to “READY”.
2
Press the key.
Result:
• The current output value appears as
shown on the right.
3 After checking the current output
value, press the key to return to
step 1.
CLR
( No )
CLR
( No )
SFCM00006009D
OUT-
J
PUT
INPUT
OUT-
J
PUT
INPUT
SFCM00006011D
CLR
( No )
CLR
( No )
CM2-MTG300-2001.book 27 ページ ２０１５年９月２９日 火曜日 午前１０時１４分

Azbil VDC Specifications

General

Brand	Azbil
Model	VDC
Category	Measuring Instruments
Language	English