Operation using HART communicator Azbil Corporation
7-42 Model MTG11A/18A, MTG11B/18B, MTG14C
Shipping data recovery
Follow the procedure described below to execute the shipping data recovery. Please
make sure that when it is executed, the internal data will return to the factory setting.
1. From online menu,
Select:
1. Device setup
2. Diag/Service
3. Calibration
6. Shipping RCVR
Figure 7-93 will then be displayed.
Figure 7-93
2. When executing shipping data recovery, select “YES” and press F4 (ENTER).
Shipping data recovery will execute, and the display will return to Figure 7-
93. Press F3(ABORT) to return to the previous menu.
CM2-MTG300-2001.book 42 ページ ２０１５年９月２９日 火曜日 午前１０時１４分
To Next Page
Loading...
Need help?
General
